D48 Matrix Signal Processor
The D48 is the result of several decades worth of NST Audio R&D experience in designing the very best in professional DSP products. Designed to give superlative audio performance, the D48 works in both live production and installations to get the most out of your system.
D48 Overview
With inputs and outputs switchable in channel pairs between analogue or AES/EBU the D48 gives you the flexibility you need to integrate into your system. Compressors are available on every input as well as a high pass filter, 6 bands of parametric EQ and up to 1.3 seconds of delay. Routing to outputs can be configured to either mix-matrix mode, free-routing or several pre-configured routing options. Flexible channel linking enables quick and easy configuration of common crossover setups or customised configurations as required. Every output channel has high and low pass filters, 8 bands of parametric EQ, up to 1.3 seconds of delay as well as a new limiter designed to offer the best driver protection with the lowest distortion.
The D48 runs at 96kHz as standard but can be switched into 48kHz mode to take advantage of 48dB/oct output crossover filters and two bands of dynamic EQ on both input and output channels. Front panel control allows instant mute of any input or output as well as editing of all the most commonly used parameters and recall of presets.
The ethernet based PC control software gives you the ability to not only control all the devices on a network but also to store preset memories and configure systems offline. With Mac and iPad control software due mid-2015, you can control your system the way that suits you.
Images
Click the image for expanded view.
Software
The latest firmware, for NST Audio devices, is included as part of the D-Net software, that can be downloaded from the D-Net page: